LiftMaster commercial garage door openers

Alliance Garage Doors & Openers, LLC logo ™

724-836-2522

724-537-6736(OPEN)

724-547-4407

724-516-6365

Memberships

International Door Association

Westmoreland Chamber of Commerce

BBB

LiftMaster Commercial Garage Door Openers

Trolly Openers -- Trolley openers are typically used for standard lift sectional doors and are available in industrial, medium, and light duty.

LiftMaster Commercial Trolly Opener Model T

Model T -- Industrial Duty Trolley Opener for standard lift sectional doors featuring a low profile and industrial ball bearings on the output shaft.

Standard Features:

Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/3, 1/2, 3/4 and 1 HP; single- or three-phase. Capacitor start on single-phase. Removable without affecting limit switch settings.
Drive reduction.
Emergency disconnect.
B2, C2, D1 and E2 wiring types are all standard and easily selectable using the Logic 3.0 Control Board (L).
Radio receiver and external radio control terminal.
Ball bearings on output shaft; heavy-duty, oil-filled bushings on reduction shafts.
Solenoid-actuated brake is standard on 3/4 and 1 HP units to prevent coasting of door. Optional on 1/3 and 1/2 HP units.
Friction clutch.
NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powdercoat finish, all reduction sprockets drilled and pinned to shafts.
Push button station.
Quick-mount header bracket.
High-strength dual L-rail track with exclusive nylon quiet-gliding chain.
2-year warranty.

Model MT -- Medium Duty Trolley Opener for standard lift sectional doors featuring a high-starting torque motor, a compact design, quicket-gliding rail spacers and a quick-mount swivel header bracket.

Standard Features:

1/2 HP single-phase motor with instant reverse and internal automatic reset thermal overload.
Auxiliary reversal system.
C2 wiring providing momentary contact to open and stop, with constant contact to close.
Operator is pre-wired to accept a sensing device, photoelectric sensors, radio controls and most types of access control equipment.
High-strength dual L-rail track with exclusive nylon quiet-gliding chain guides on rail spacers for quiet, smooth operation.
Dependable dual relay system.
24V NEC Class 2 control circuit.
Drive reduction.
Emergency disconnect.
Push button station.
NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with baked-on powdercoat finish.
Heavy-duty oil-filled bearings.
External radio control terminal.
Friction clutch.
2 year warranty.

Model ATS211X -- Light Duty Trolley Opener for standard lift sectional doors up to 14 feet high, rated for 8 cycles per hour.

Standard Features:

1/2 HP single-phase motor with instant reverse and automatic reset thermal overload.
Automatic safety reverse/automatic door stop.
The Protector System non-impact infrared safety device.
Security+ anti-burglary coding radio receiver. (Transmitters and keyless entry available).
Manual release in case of power failure. A push of the button automatically reconnects the door and operator.
Maximum run timer.
Heavy-duty I beam configured trolley track.
Push button station.
Automatic light delay.
1 year warranty

Hoist Openers -- Hoist openers are designed for use on rolling doors and grilles, as well as industrial sectional doors with high or vertical lift.

Model H -- Industrial Duty Hoist Opener featuring a continuous-duty high-starting torque motor, a universal-mount frame design, industrial ball bearings on the output shaft and an emergency chain hoist with an electric interlock.

Standard features:

Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/3, 1/2, 3/4 and 1 HP; single- or three-phase. Capacitor start on single phase. Removable without affecting limit switch settings.
Drive reduction.
Emergency manual operation.
B2, C2, D1 and E2 wiring types are all standard and easily selectable using the Logic 2.0 Control Board (L).
Operator is pre-wired to accept a sensing edge, photoelectric sensors, radio controls and most types of access control equipment.
External radio control terminal.
Positive locking mechanical brake system.
Friction clutch.
Industrial ball bearings on a 1" output shaft; heavy-duty, oil-filled iron bearings on reduction shafts.
24V NEC Class 2 control circuit.
NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powdercoat finish, all reduction sprockets drilled and pinned to shafts.
Push button station.
2 year warranty.

Model MH -- Medium Duty Hoist Opener featuring an adjustable friction clutch, a standard solenoid brake, a high-starting torque motor, a compact design and an emergency chain hoist with an electric interlock.

Standard features:

1/2 HP powerful motor, 115V single-phase with instant reverse and internal automatic reset thermal overload.
Dependable dual relay system (NEMA 1 enclosure).
24V NEC Class 2 control circuit.
Emergency manual operation.
Heavy-duty solenoid actuated brake.
C2 wiring providing momentary contact to open and stop with constant contact to close.
Operator is pre-wired to accept a sensing device, photoelectric control, radio controls and most types of access control equipment.
Drive reduction.
Heavy-duty oil-filled bearings.
Push button station.
NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with baked-on powdercoat finish, all reduction sprockets drilled and pinned to shafts.
External radio control terminal.
Friction clutch.
2 year warranty.

Jackshaft Openers -- Jackshaft openers are designed for use on rolling grilles and shutters, as well as rolling doors. Some openers are also designed for use on industrial sectional doors with high or vertical lift.

Model J -- Industrial Duty Jackshaft Opener featuring a removable hinged electrical box cover, a continuous-duty high-starting torque motor, industrial ball bearings on the output shaft and a universal mount frame design.

Standard features:

Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/3, 1/2, 3/4 and 1 HP; single- or three-phase. Capacitor start on single phase. Removable without affecting limit switch settings.
Drive reduction.
Emergency manual operation.
B2, C2, D1 and E2 wiring types are all standard and easily selectable using the Logic 2.0 Control Board (L).
Operator is pre-wired to accept a sensing edge, photoelectric sensors, radio controls and most types of access control equipment.
External radio control terminal.
Positive locking mechanical brake system.
Friction clutch.
Industrial ball bearings on a 1" output shaft; heavy-duty, oil-filled iron bearings on reduction shafts.
24V NEC Class 2 control circuit.
NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powdercoat finish, all reduction sprockets drilled and pinned to shafts.
Push button station.
2 year warranty.

Model MJ -- Medium Duty Jackshaft Opener featuring a compact design, an adjustable friction clutch, a standard solenoid brake and a high-starting torque motor.

Standard features:

1/2 HP powerful motor, 115V single-phase with instant reverse and internal automatic reset thermal overload.
Dependable dual relay system (NEMA 1 enclosure).
24V NEC Class 2 control circuit.
Floor level disconnect.
Heavy-duty solenoid actuated brake.
C2 wiring providing momentary contact to open and stop with constant contact to close.
Operator is pre-wired to accept a sensing device, photoelectric sensors, radio controls and most types of access control equipment.
Drive reduction.
Push button station.
NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with baked-on powdercoat finish, all reduction sprockets drilled and pinned to shafts.
External radio control terminal.
Friction clutch.
2 year warranty.

Model 3900 -- Model 3900 is a light duty jackshaft opener for light-duty commercial sectional applications only. It features a compact design ideal for limited height, cathedral, or obstructed ceiling installations. It may be used on standard and high-lift (maximum 7 ft. high-lift) sectional doors measuring up to 14 ft. high and up to 18 ft. wide, but not exceeding 180 sq. ft. or 650 lbs.

Standard features:

Heavy-duty 24V DC motor provides ultra-quiet operation, along with variable speed smooth start and stop.
Ideal for limited height, cathedral, or obstructed celing installations; mounts mounts on the left or right side of door and attaches to the torsion bar.
1-button station for OPEN & CLOSE functions with type B2 control wiring is standard for all operators. Controls with 1, 2 and 3 buttons are available.
The Protector System: A non-contact photo safety sensor designed to sense an obstruction and signal the door operator to reverse to open.
Lifetime motor warranty.

Alliance Garage Doors & Openers, LLC logo ™

4560 Route 30
Greensburg, PA 15601

(Between Beatty Crossroads & Mt. View Inn light)

Sales - Service

Professional Installations

Fully Insured - Free estimates

PA Home Improvement Contractor Registration No. PA 14607 -- READ MORE

Alliance is a distributor for:

Garage Doors

Garage Door & Gate Openers

Commercial Door & Gate Openers

Garage Door Openers & Accessories

Alliance serves the following areas:

Greensburg 15601, Irwin 15642, North Huntingdon, Latrobe 15650, Jeannette 15644, Ligonier 15658, Derry 15627, New Derry 15671, Delmont 15626, Export 15632, Murrysville15668, Acme 15610, Mount Pleasant 15666, Scottdale 15683, Connellsville 15425, New Stanton 15672, Youngwood 15697, New Alexandria 15670, Crabtree 15624, Unity Township

Also serving areas in:

Westmoreland County, Fayette County, Indiana County, Somerset County and Allegheny County

Alliance is a proud sponsor of: